Top 10 BETAFPV Flight Controller – App- & ferngesteuerte Drohnen

Als Amazon-Partner verdiene ich an qualifizierten Verkäufen.

1. BETAFPV

BETAFPV F405 2-4S AIO 20A V4 Toothpick Brushless Flight Controller No RX BLHeli_32 20A ESC for Beta95X V3 Whoop Drone 2-4S Motor

BETAFPV - Support receiverbuilt without receiver, supports frsky xm/xm+/ futaba/ flysky /TBS Crossfire/ DSMX receiver. Refer to the RX connection pictures. Suitable dronescomes with a 26mm x 26mm whoop mounting pattern, this board can be added to both the toothpick drone and the cinematic whoop quadcopter like Beta95X V3 and Beta95X V3 HD Digital VTX.

Compatible motorsf405 aio 20a fc is compatible with 110X/120X/140X series motors, pilots can build a bigger quad with this powerful FC to save weight. F405 chipthe flight controller has been updated to f405, can totally handle 20A continuous current22A burst, gives pilots a powerful flight.

Let you break through the limits of quad and explore more possibilities in the flight. Pluggable connectorbetafpv f405 aio 20a flight controller integrated digital VTX connector and receiver connector, just plug and play, which is convenient for installation. Please note: when you connect the external receiver, the pads near the RX connector need to be soldered.
MarkeBETAFPV
HerstellerBETAFPV

2. BETAFPV

BETAFPV F4 FC Brushed Flight Controller with SPI Frsky Receiver Betaflight OSD Smart Audio for Tiny Whoop Micro Racing Drone

BETAFPV - Upgraded to 30a lower resistance MOSFET, Firmware version: betaflight_matekf411rx_3. 4. 0 F411 processor can reach to 100mhz, much faster than the f3 flight controller with 72mhz. The default configuration from factory is frsky d16 mode frsky_x.

Integrated with frsky receiver only. Built-in betaflight osd stm32 controls OSD chip over SPI in DMA mode. Manual: http://support. Betafpv. Com/support/solutions/articles/27000051569-can-t-bind-to-f4-fc-spi-frsky-receiver-a-guide-for-eu-lbt-radio-controller-users. Designed to work with current Tiny Whoop or Blade Inductrix setups. Some basic guidance and typical FAQ, please check it here : https://betafpv. Freshdesk. Com/support/solutions.

Support Smart Audio. The flight controller board comes pre-flashed with betaflight firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2. 0 connector, AKA PowerWhoop connector. In betaflight configuration, it should be setted as frSKY_D receiver aka Frsky D8 mode or FRSKY_X receiver aka Frsky D16 mode in SPI RX mode. Built in frsky receiver is compatible with taranis, Horus X12S, X9E, Taranis Plus, XJT Modules.
MarkeBETAFPV
HerstellerBETAFPV
Höhe2 cm (0.79 Zoll)
Länge5 cm (1.97 Zoll)
Gewicht0.01 kg (0.02 Pfund)
Breite5 cm (1.97 Zoll)
Artikelnummer00313249
Modell.

3. BETAFPV

BETAFPV F4 20A AIO Brushless Toothoick Flight Controller V3 2-4S BLHELI_S 20A ESC No RX with XT30 Connector for FPV 3-4inch HD Toothpick Quadcopter

BETAFPV - If you want to use the full functionality of the digital VTX unit, please choose this version. Each chip integrates 1 MosFET. If you meet any technical or quality issue just feel free to contact us. New generation designf4 aio 20a fc uses 12 single n-channel mosfet chips.

Double-sided motor solder padtwo options for motor installation which include pins connected or wire connected. So it could stand larger current for aggressive flying. Real holes&new layoutcomes with real holes instead of notches, with side-mount USB port, all solder pads of this Toothpick F4 AIO 20A FC are at the edge, which is convenient for installation and solder. The toothpick f4 aio 20a fc comes with motor pins but has not pre-solder in default, which is convenient for customer soldering with motor wires.

8m flash chipthe v3 version has all the function of V2 board, also add 8M Flash chip for Betaflight Blackbox, which is convenient for pilots to record flight data. Support digital vtx unitthis toothoick 20a fc v3 version could support DJI digital FPV unit and Caddx Vista digital FPV unit.
MarkeBETAFPV
HerstellerBETAFPV

4. BETAFPV

BETAFPV F722 AIO 35A 2-6S Toothpick Brushless Flight Controller BLHELI_S 35A ESC No RX with XT60U Connector for 4-5inch Toothpick Drone 2-6S FPV Brushless Motor Like 14xx 15xx 16xx 18xx 20xx Motors

BETAFPV - 6 full uarts are available on this board. With the 6s battery and this f722 35a aio toothpick fC, the drone will break through the limit of the power of the toothpick drone, exploring more possibilities in 4-5'' drones.

Compare with f4 aio 35a fc, providing a better performance capability and higher calculation speed, F722 FC's firmware is upgraded from F411 to F722, which brings pilots a more stable and smoother flight. F722 aio 35a fc has specially added a 6-pin connector for dji digital VTX, just plug & play, less solder work needed, perfect for the pilots who enjoy the DJI Digital VTX system. It can handle 35a continuous current40A burst, totally supports the 2-6S lipo battery, brings the drone a stronger flight performance. With plenty of uarts, pilots could have more options for external parts like VTX, Receiver, GPS, and other components.
MarkeBETAFPV
HerstellerBETAFPV

5. BETAFPV

BETAFPV F4 AIO 1S Brushless Flight Controller SPI Frsky LBT Receiver 5A ESC Integrated VTX with BT2.0 Connector for 1S FPV Brushless Whoop Drone Like Meteor65 HX100 SE Quadcopter

BETAFPV - Frsky receiverbetafpv f4 aio 1s brushless flight controller comes with an spi Frsky receiver, it pre-flash to LBT protocol in default. Rgb ledsincreased two rgb leds on this newest f4 aio 1s brushless FC to make your drone looks dazzled.

Any other technical needed just feel free to contact: [email protected] Com. Integrated 25mw vtxbetafpv newest f4 aio 1s brushless flight controller integrated 25mW VTX, no need to solder an external VTX, more convenient for installation and it saves the weight of the weight-sensitive whoop drone like Meteor65. It supports to change its protocol from LBT to FCC if your transmitter is FCC, more detail please contact us.

Plug&play connector for cameracome with a 3-pin connector for connecting C01 micro camera and 6-pin connector for Nano HD camera directly, no soldering needed, it is convenient for installation, just plug and play. Compatible dronethis newest f4 aio 1s brushless flight controller comes with F411 chip, it is specially designed for 1S brushless whoop drone like Meteor65, HX100 SE.
MarkeBETAFPV
HerstellerBETAFPV

6. BETAFPV

BETAFPV 2pcs 300mAh 2S Lipo Akku 45C/90C 7.4V FPV Batterie mit XT30 Stecker 18AWG Silikon Draht Kompatibel für 2S RC FPV Racing Drohnen Like Beta85 Pro 2 Mobula 7 Eachine Trashcan

BETAFPV - Batterien nicht überladen oder überladen. Hinweis&garantie-garantienicht stoßen, kurzschließen und batterie in feuer oder wasser setzen. Bitte kontaktieren sie uns sofort, wenn sie probleme mit unserem Produkt haben geben Sie "Ihre Bestellungen" ein, auseinandernehmen, um Hilfe zu erhalten oder senden Sie eine E-Mail an unsere After-Sales-Mailbox.

Anschluss 300mah 2s lipo-akku mit xt30-kabel kann problemlos an unseren bürstenlosen BETAFPV 2S FC angeschlossen werden. Hohe leistung erhöhte entladerate von 30c auf 45C, leistungsstärker und optimal, wenn Sie mit hoher Geschwindigkeit mit Bürstenlosen Motoren fliegen. Leichter dieser akku wiegt ca.

Wir versprechen 1 Monate Garantie für jeden Kunden. Kompatibler drohnender 300mah 2s-akku besitzt eine stärkere leistung mit stärkerer Mobilität und höherer Empfindlichkeit bei Hochgeschwindigkeitsflügen. 18, klein, 5 x 12 x 45 mm, 16, 5 g / st, und ist leichter als ein 350 mAh 2S-Akku mit einem Gewicht von 3g. Es ist geeignet für beta85 pro 2, Mobula 7 und Eachine Trashcan 2S bürstenlose Whoop-Drohne.
MarkeBETAFPV
HerstellerBETAFPV
Gewicht0.05 kg (0.1 Pfund)
Artikelnummer00313522

7. BETAFPV

BETAFPV Lite Brushed Flight Controller V3

BETAFPV - No need additional external Bayang TX module as V2 board. Comes with the v3 board, the PC configutator is also available. Integrate 25mw vtx this v3 lite brushed flight Controller Integrate 25mW VTX, support change VTX channel brand via remote control.

Pilot could tune the fc board via the PC Configurator released with the V3 board at the same time. Litesilver firmwarelitesiver is the next generation firmware developed by BETAFPV for whoop FPV drones. Spi frsky d8the betafpv lite brushed flight controller v3 built-in spi Frsky receiver with D8 protocol, compatible with almost radio transmitter in the market.

Firmware flashingpc configurator is available for FC tuning and firmware flashing. It has the ability to change settings for custom builds, or to adapt to personal preferences. Lite osd menuliteosd osd menu is the the smallest and most efficient OSD solution, is also integrated in the V3 board and Players can easily set up many configurations according to their preferences through the remote control.
MarkeBETAFPV
HerstellerBETAFPV
Artikelnummer1040002
Modell1040002

8. BETAFPV

BETAFPV ExpressLRS 2.4G F4 1S 12A AIO Brushless Flight Controller with 12A ESC Type-C USB Port Dipole T Antenna Compatible for 1S Ultra-Lightweight 3" Toothpick Drones or 65/75mm Racing Drone

BETAFPV - At the same time, all the pads are left for the external receivers with UART1 and UART2, for buzzers, 2 programmable RGB LEDs, etc.1s 12a escmost of the 1s flight controllers on the market come with 5A ESC, this FC especially integrates 1S 12A ESC which can provide more sufficient power for 3" toothpick drones.

Technical support & warrantywe have a professional team and considerate after-sales service. This makes expresslrs one of the fastest RC links available while still offering long-range performance. If you have any questions, you can contact us by email, and we will definitely reply you within 24 hours. Expresslrs expresslrs is an open-source rc link for rc applications, based on Semtech Lora SX127x or SX1280 hardware for RX and TX respectively.

Compatiblethis f4 1s 12a fc board integrates the receiver with the most popular radio link ExpressLRS in 2021 and designed for long-range 3inch ultralight toothpick drones, be compatible with most 1S 3" frames. Configurationthis flight controller is built-in current meter, and ExpressLRS receiver. We offer a exchange service for all sale goods within half a year! .
MarkeBETAFPV
HerstellerBETAFPV
Artikelnummer01040001_2
Modell01040001_2

9. BETAFPV

BETAFPV 4pcs 1404 4500KV Brushless Motor 4S FPV RC Motor for F4 AIO 20A Toothpick Flight Controller D63 3-Blade Propellers 4S FPV Whoop Drone Quadcopter Like Beta95X V3 Pusher Drone

BETAFPV - Just plug and play, no soldering required. Plug and cablethe plug of betafpv 4500kv 1404 motor is micro jsT-1. 25 3-pin connector, with 28AWG cables.

F4 aio 20a fc&d63 3-blade proprecommended using with f4 aio 20a v4 toothpick flight controller and D63 3-blade 1. 5 mm shaft propellers, totally supports 4S. Weight and sizeweighs 8. 49g/pc with size 12. 3*18. 6mm. Compatible drone1404 4500kv brushless motor is a 4S FPV motor, compatible with 4S FPV drone like Beta95 V3 pusher drone quadcopter. It can provide pilots with an efficient power and eliminate the noise. Package&supportincludes 4pcs 3800kv 1106 motors, 4pcs motor clips and a set of screws. Motor clips can make your flight stable to prevent the video from shaking.
MarkeBETAFPV
HerstellerBETAFPV
Gewicht0.01 kg (0.02 Pfund)
Artikelnummer00313894
Modell00313894

10. BETAFPV

BETAFPV Beta65S Lite Frsky D8 1S Tiny Brushed Whoop FPV Drone with Camera V3 Flight Controller Built-in receiver Support Two Modes

BETAFPV - Equipmentthe flight time 3-4 minutes 1s 300mah recommended. Tiny drone betafpv 65s lite brushed whoop drone is the smaller FPV Drone 25g without battery, suitable for most controllers on the market.

It can be easily operated in a small space. Humanized designthe structured style and four propeller brackets ensure safe flight and protect you from the physical injury of the rotating propeller. This betafpv 65s lite drone is came up with C02 Micro Camera bring you a clearer vision and the flight time 3-4 minutes 1S 300mAh recommended. It is the first choice for beginners and children.

It is compact and portable and can be put in a pocket. Upgrade & sturdinessbeta65s lite has been upgraded brushed fc V3 Frsky D8 with 7x16mm brushed motors, make drone have better flight dynamics. Abs material can withstand numerous impacts or drops, suitable for beginners and child. Small and light the tiny drone beta65s lite is a perfect indoor drone.
MarkeBETAFPV
HerstellerBETAFPV
Höhe7 cm (2.76 Zoll)
Länge12 cm (4.72 Zoll)
Breite12 cm (4.72 Zoll)
Artikelnummer01010002_2